• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

linuxman51
Reaction score
14

Profile posts Latest activity Postings About

  • Hey man so reading some of your post you seemed like the one to talk to before josh@yoshi confirmed that you are.I just went micro on my built bottom b230ft and am looking for a good base to break it in on. I’ve got it started and idling although low and rich but don’t really trust myself on the small bit of knowledge I have.please email me and I’ll give you a list breakdown or whatever you need Halfwayhousecru@gmail.com
    Hey man. I'm down in Huntsville, working for Blue Origin at NASA 4670. I have a friend down there looking for a 245. You got any leads? And also, can we connect this weekend???
    Hey I've got a few questions regarding data logging LH2.4 ecu's with a modified VGA cable. I saw a brief description you had posted some time ago but it wasn't clear enough for me to follow. If you could help me out I would greatly appreciate it, thanks.
    Email: jmsaccento@gmail.com
    Phone: 858-524-4886
    Hi, I was told from a friend that you are the person to talk to about a plug n play MS for a +t setup on my lh 2.4. I'm interested in buying one if available. My email is rcmasovo@gmail.com. Thank you!
    Hi bud I have been doing a lot of research and am terrible with wiring I have a built 1988 740 running lh2.2 I have seen that if I convert to lh2.4 witch would be easier than running ms that you have a plug and play ms for lh2.4?? If so can you let me know how much this would cost I am very excited to get her dialed in!!:) thank you if you could email me at jrb7563@gmail.com
    -Jacob
    hey brother I have a 1987 740 fully built with these goodies. Red Block
    RSI Rods
    JE Pistons
    IPD Cam
    Custome intake manifold and Header.
    3" SS exhaust turbo back
    T3/T04e 50 trim just rebuilt!
    1000cc injectors
    E85
    MS2 Extra
    I have every suspension mod IPD sells.
    T5Z summit transmission.
    Willwood brakes.
    8,000 miles on engine.
    I moved to Denver Colorado and nobody here can tune my car and its running rough since I moved. mega squirt is def the issue and need it tuned. any help from you would damn near save me

    hit me up if you can text is usually the best I have bad service this week or you can email me at Jambohi@gmail.com
    Hello I have a question I'm doing all autometer gauge s I'm my car.... I can figure out the sending signals for them but I can't seem to set up a charging light and keeping my car from dieing.... the battery drains after driving cuz no return charge is coming back, 83 244 ms2
    Hey, I am a newbie to this board. Did you post this AW70-71 pic:
    http://www.pbase.com/kdh51/image/137578114
    If so, thank you! I just removed my extension housing for the first time expecting to replace a bushing and found a bearing set up (93 240). Does that pipe to the bearing just flop around or does it attach somewhere? When I pulled the housing it was just flopping around. Also, the rubber thingy became detached, how should I reattach it? Anyway, would appreciate any advice.
    Thanks very much,
    Rob in Pennsylvania
    Hello
    I am in the middle of building 16v 242 , 1984 with T5 tranny. 2.1 turbo Engine is coming out very soon .
    Complete 16v setup is going in soon.
    I will be swapping complete engine harness from newer 240. I was thinking about going with VEMS for engine managment but your megasqurit set up looks interesting .
    Plans are around 350 WHP . Running turbocharger k24 out of S60r .
    What would be you recomendations .
    Also have complete harness from 91 780 bertone all ready out.
    Please respond to maciekb2002@yahoo.com
    I check my email 3 times a day
    Thanks
    I've never removed a roof rack, so I can't really help you with that. removing the headliner shouldn't be that big of a deal, you drop the trim and the clips. if it's a wagon it comes out the back. if it's a sedan... I dunno how they come out in one piece.
    My roof rack is leaking. Mike H. my brother told me you had similar issues. I have removed my headliner. What goops/ hardware, etc did you use to correct your leaking issues? Also, where can I find a new headliner, seeing as how mine has become no-more?

    Thanks
    My roof rack is leaking. Mike H. my brother told me you had similar issues. I have removed my headliner. What goops/ hardware, etc did you use to correct your leaking issues? Also, where can I find a new headliner, seeing as how mine has become no-more?

    Thanks
  • Loading…
  • Loading…
  • Loading…
Top