Search results

:cheers:

Gotcha. No doubt you guys get it under control, doing a fantastic job, we'll get there :cheers:

Oh no, now we have spam links as well... Curious question, why didn't this happen daily on the old Forums?

Seems to have come only in 7 series, as the part says. I found a diagram of a 760 on the Ozvolvo archive showing the light - component 10/23, going through the connector on left A-post with a Green/Red wire.

*chna It's so they can't track you down!

Well that escalated quickly :omg:

I really do appreciate all the work you admins do and please don't take this the wrong way, but every morning when I visit TB (being in Europe that obviously means middle of the night in the US), there are so many spam posts it makes viewing the board a bit annoying. Hope there's something that...

The JW Speaker units that John mentioned seem to be great. Quite expensive but they have an actual correct beam pattern to not blind anyone and seem to be very bright. Here's a thread about them with some great photos...

This is getting out of hand a bit... Those damn bots man.

Volvoforums UK has quite a few threads on DIY boxes. Should be very easy to make them with very few parts. One of them: https://www.volvoforums.org.uk/showthread.php?p=2660813

No.

Yes, what Acke said. I've been through this, I replaced the glass lens on my 940 after it cracked. Just the 8 clips and a gasket between lens and housing. It also was an aftermarket lens (TYC brand) and the pattern looked identical to the OE lens and it also include new clips and the gasket...

Someone seems to make them already: https://bottermanufacturing.com/products/volvo-900-700-cargo-cover-mounting-brackets Meanwhile, I found the installation instruction of the original Volvo mounting kit, which is linked on VOC / Brickboard FAQ...

Hard to tell how many "clicks". Get an AFR gauge and a boost gauge first, you can then turn up the boost to B230FT level safely (0.65bar), the two engines are identical apart from the wastegate actuator. FK should have a stock pressure of 0.35bar if I remember correctly. I ran boost of around of...

There is a mounting kit and it's the same for 940/960/V90 You have to drill 2 holes on each side of the C-pillar to mount the brackets and one each in the trim in the brake light area for the hooks. The mounting kits are NLA and I got a NOS one a couple years ago, unfortunately I think I threw...

I wouldn't bet on that though, it depends on the year if they are prewired as far as I'm aware. I only know from my research that 96+ models came prewired here in Europe, so only when the US obviously didn't get 940's anymore. As there were always significant differences between US and European...

Here's what I got from Rich back then. Unfortunately most of it is in German, but you can use an online translator. Maybe they help in some way.

I went through the install of Keyless Entry to my 940 a few years ago. It was really confusing at first, but I was helped tremendously by Rich in my thread. Rich has made a thread and a very helpful PDF explaining the connections for the relay and other parts of the alarm system. The relay has a...

Thanks, it's a 142 that is originally from Finland.

https://www.gcp.se/en/catalogues/ You can download a PDF copy as well after opening up the catalogue and click on the Acrobat icon in the right bottom corner besides the search field.