Search results

well, i have used the search but i guess im doing something wrong. is there a way to convert the tach at all? i would prefer the standard clocks as opposed to one of those massive things with a torch attached to blind you when xhaning gear. any help would be warmly appreciated!

as per title. im looking at fitting one. has anyone got any measurements for the T3 wastegate adapter you can get? as in height. i dont want to go down the diy manifold road

since some a**sehole off volvo owners sent me the WRONG ecu (i wanted a 2.3t to fit on my 2.0t), i have decided for the mean time, to fit an FCD. i have been looking about, surfing t'interweb and what not and have come to the conclusion that zener diodes are crap. i want to make my own...

ive got it on the pipe almost immediately after the turbo and before the intercooler it will tick over if i dont touch the throttle immediately after i touch the key but rev it to get the BOV opening and it just hates it and wont idle and throws the code 1-3-3 but theTPS looks fine and if i...

hi all, firstly i hope someone can help here. i have a 940t which i want to fit with a bucket seat and a decent steering wheel now, it has seatbelt pretensioners - the electronic ones, and an airbag. i hope to keep the subframe and seatbelt so i can use that with the seat. is there any way...

hi all im after a cad model of a redblock including engine mount locations and gearbox bolting points im going to build a locost based on a b200ft hopefully and slap an m90 and g80 in it since my 940 weighs 1900kg and a locost will weigh literally half that, i dont think ill need much more...

f***ing thing pi$$es out the oil from the block end of the return pipe. is there supposed to be a seal? if its rubber or something or looks normal can someone give me dimensions so i can have someone make me one or give me a part number or better still send me one foc for a favour. its so...

has anyone actually made one of these brackets as an off the shelf to buy item? ill be buggered if i can work out how to do it so that it looks like a factory bracket. i have the theory in that it needs to be identically spaced to the original location for it to work correctly. i just cant...

now then ive removed my air con pump and radiator, chopped the electrics off almost to the relay. should i join any wires up to make my normal radiator fan to work again?

ok i soldered in the diode on the MAF sensor wiring harness. car runs lovely. only thing is, it still has symptoms of a fuel cut. ive cranked the boost to 12psi and when it spikes at 15 it seems to let off and boost in a fluttery fashon. ive stuck a 2p piece in the cbv to up the spring rate...

hi all. with everyone seeming like a friendly helpful bunch i was hoping to call on the all knowing knowledge base of this community my head gasket im sure is on its way out in that its mixing oil and water, though not spitting any mixed mush on the cap, it leaves its deposits on the dipstick...

im trying to find a Smiths 'Max'. 5 spoke wheel. looks a little like a T5R wheel 17 x 6j i think with the 5 x 108 pcd. ET45 offset. if anyone could help i would appreciate it very much mods - i dont believe this is in the wrong section as its not a general 'wanted' ad. people are more...

hi everyone, im new here so please be patient. mostly this sort of thing comes easily to me like clocking turbos and such. ive just bought a 940 wentworth red block 2 litre turbo. ive already got a turbo off an 850 in the works and i wanted to know if anyone knew where i can get an exhaust made...