• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Search results

  1. W

    Dead Alternator?

    I will put it all back together and try and trouble shoot more of the issue.
  2. W

    Dead Alternator?

    The battery is less than a year old and has only been used a handful of times. When I turn the key there is nothing, it acts like a dead battery in a modern car. I have checked the spark and fuel. That's what I thought also but I have read on a couple of other posts that it could be that the...
  3. W

    Dead Alternator?

    So my car was having a hard time starting this past weekend. It would take multiple cranks to get it to fire up. I have checked that my battery is fully charged and with the key in the "on" position I have 12+ volts at the starter and the alternator. When I try and start it there is nothing...
  4. W

    Larger Intercooler

    Another question, when you move the key to the "on" position and you hear the fuel pump prime will that fire the injectors or will you need to crank it over to see them fire? just trying to figure out why it drove on Saturday but hasn't started since.
  5. W

    3D Printed Parts Thread

    Maybe a google share drive or something like that?
  6. W

    Larger Intercooler

    Would a larger intercooler effect how the car is running? 1990 B230F+T T Cam TD04-12B VW intercooler Brown Injectors Turbo ECU & EZK w/ Bucha WS board I recently added in the VW intercooler from a previous post: https://turbobricks.com/index.php?threads/somebody-at-vw-loves-old-volvos-why.255477/
  7. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    Quick update. it runs. The out puts on the board I believe were backward. I swapped them and it fired right up.
  8. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    So I have it installed, but it is not starting. It attempts to fire but it then makes a weird sound. Any thoughts? Here is a small video of what is happening. I have the switch 12+ going to the blue wire from the old coil could that be the issue.
  9. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    Here is the mounting plate I made from the test piece I designed and 3D printed. Its a little crude, need to get my spacers but have all the hardware figured out and now onto wiring.
  10. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    Once I have mine all compiled I will post a photo with some links for the materials I found.
  11. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    ok, cool. I will try and find a set of wires. My brother might have a sheet of aluminum I could make a mounting plate for the top of the valve cover. I 3D printed a test plate but need a little fine tuning before I send it out to be cut.
  12. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    For the spark plug wires that attach to the Bosch 2x2, which ones would you guys recommend. I read that the 240 ones don't work. Also does anyone sell the mounting plate that goes on top of the valve cover or are they mostly custom?
  13. W

    B230 crank pulley

    That I am not sure, might toss them an email and see. They are pretty quick to reply but might need google translate.
  14. W

    T6 motors..

    You can also check out Bad Decision Works on IG. He swapped in a T6 into his 245 as well.
  15. W

    B230 crank pulley

    Not sure if this is what your looking for but KL Racing has a 2 grove crank pulley. https://shop.klracing.se/sv/artiklar/remskiva-b230-8v-2-spar-med-triggeruttag.html
  16. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    Thank you for that information. I am not well informed with electronics and PCBA's.
  17. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    The CEL turns on when the ignition is in the on position then will turn off once the engine is cranked and running.
  18. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    Thanks for the info, if the car runs fine right now do they need to be replaced?
  19. W

    Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

    I just installed my WS board on my ecu. I have still need to complete the wiring. The person that was doing the soldering showed me that a couple of the resistors were blown out. He said he can replace them but would need to know what they are. When the car is running we are going to add in a...
  20. W

    Failz' 240 Turbventure 2: The Ebay Turbo Boogaloo

    When I pull the motor to install the rods I will drill the block. I'm gonna send it until that time happens, mine has been holding steady leak-free.. Knock on wood.
Top