Search results

Finally, get rid of that nasty ol' fair-weather PCB.

...eventually.

(Apparently, this thread didn't survive TBageddon 2022. So here it is again.) For the last few months, apostrophes have been replaced for ?. At first, I thought Churd forgot which character to use, but it's coming up on much older posts. Is anyone experiencing this? Instead of "there's a cat...

So basically I upgraded the Hella MicroDE to HID. (not mine originally, just sharing what I did) I just wanted to share a parts list to make it easier for anyone interested. I did this to my 940. Parts I used: Harness: https://smile.amazon.com/gp/product/B00C5WS50I (connects to the stock...

Anyone ever have issues with these rimps getting bent or out of round? I'm currently (for the moment) running BFG Advantage T/A 225/50R17. It almost feels like tread separation or loose lugs. I can't *see* any wobble when the car is in motion, but I can feel it. I'm going to have my tires...

Ie compressed "air" cans. Seems to be made of the stuff that's replacing R134a. Thoughts? Experiences? Appears to work as well as R12 and is "safer" for the air we breathe. Specifically the dust blowers with "Difluoroethane".

What happened to the :cameron: smiley?

(remove spaces and _) < ifr_ame src= and then "full link to your video assuming it's publically shared" and then /preview" width="800" height="480"><_/ifra_me_> As in: <iframe src="https://drive.google.com/file/d/1x1sDBX5xdsAXssW13X4K_7Y99RyfVfFY/preview" width="800" height="480"></iframe>...

1994 940 with AC. It gets up to normal temp in what appears to be a normal time (between 2 and 4 minutes of driving) However, at idle, there's almost no heat. It's warm, but not hot. Higher fan speeds incread volume, but lowers the ammount of heat. at ~2,000rpm, there's some heat, but not...

I'm about the replace mine as the friction material is fubar. It's got a new right side cable and I wanted to know if there's tips or suggestions on replacing them. I want to make sure that the new rotors clear the new shoes as after I replaced the cable (right side) it was a super tight fight.

Anyone ever retrofit 2005 S40 seats into a 940? Or Anyone aware of any issues is doing such a thing?

1994 940 cruise control. I can see the vacuum motor, it's got a hose running to the actuator, but there seems to be a nipple that has nothing on it but two hoses that come from the back of the pump. Are those outlet? Issue is the cruise works only at highway speeds and only just. I'm not sure...

Of course this happens in winter. I think I can fix it, but based on what I've seem there's a grommet missing/broken. (in red) Anyone know a source/part number I can get it from?

So this issue came up. 1994 940 When I get to between 1/3 to 1/4 of a tank and take a turn at speed, the car hesitates for several seconds. Once straightened out it is fine. I'm thinking fuel pickup in the tank is the issue. Anyone have thoughts?

So, like so many of us here, the HVAC fan control flap cuts out on boost/zero vacuum situations during the course of normal driving. I've read that replacing the component affected by this is problematic. So I got myself a small 12v vacuum pump and wanted to engage some of you'se guys on the...

For the first few days the brakes were fine, but now the are soft. They do grab...eventually. What should I check?

So my 13c compressor wheel is starting to make contact. So I'm thinking something larger would be in order. I remember a thread (that I can't find) that had a list of directly compatible TD04 units that can be fit with little or no modifications (other than re-clocking and wastegate mounting)...

Anyone here ever modify the Draco/Adhara/Hydra lug cover to expose the lug holes? These covers: