1991 940 Turbo

[JLind]

Hi all!

This is my second brick, but first Turbo brick. Owned it for a full 2 days, but got some fresh 10W-30 into it today

Long term I’m interested in taking it to 250hp. Is there a thread on what bigger turbo would fit? 16T like this? 8658097 TD04HL-16T HPT

Thanks!
Jesper

 

[JLind]

Pic

 

[TilledChip]

250hp to the crank or wheels?

Also this has good info:

Tb newb performance faq

Ok. As discussed in the other forum, I decided to give this a go. I think the goal of the FAQ should be to provide QUICK, to the point information, along with a link to more advanced information. It SHOULD NOT be all-inclusive. Once the newbs get going, let them get their feet wet on their...

turbobricks.com

 

[Wilford Brimley]

Exhaust(3" downpipe and after) intercooler, turbo, up the boost, GET A WIDEBAND AT MINIMUM, a boost gauge would be good too, ipd cam just to start

 

[JLind]

Pic

 

[JLind]

Crank would be fine. Thanks for the pointers!

 

[swedishiron.com]

Spend some time reading these threads, too:

15G install guide/walkthrough

Hey guys, I am jonesing to install my 15G, but for some reason, Tbrickers like to keep secrets and make a few bucks when it comes to this conversion. :-P I've gathered that it's an almost-direct swap from my 13C...lines and banjo fittings are supposedly the same. Clocking the turbo to meet the...

www.turbobricks.com

&

How to setup a 15g/16t/18t/19t for RWD

i know a smart man would not do this as it MIGHT hurt my selling of turbo business BUT i'm more about helping people so here goes ok so first you get the turbo unbolt everything, and take it apart remove the guide pins ... haha and clean it (i have pics of this but i need to find them so i'll...

turbobricks.com