3D Printed Parts Thread

[quillc]

Would that be strong enough for suspension bushings?

Should be. Delrin is tough stuff. Would be really stiff tough (stiffer than Poly).

 

[Hotdoggin]

Delrin would make great manual trans bushings to fix all that slop. Delrin is good ****.

 

[quillc]

Its also self lubricating - no squeaks.

 

[theknave]

Delrin?

 

[iHateVolvoPeople]

Can someone please 3d print a center console for a 240? I pulled mine all apart and epoxied everything back together..looked good until my friend tried lifting himself out of my car with it, now it's shattered.

 

[iHateVolvoPeople]

http://store.voluparts.com/volvo-240-parking-brake-cover/
This is too much and probably weak.

 

[VB242]

I would really really really like a mirror image of the left hand kick plate without the fuse box access panel. On my 242 there's a hole covered with a plate underneath the computer that leads to the outside world. Turns out the fresh air vent that I got off my parts car will bolt right in that hole, just need a kick plate with a slot for the lever and vent holes and voila fresh air vents on both sides like a 142.

 

[theknave]

Can someone please 3d print a center console for a 240? I pulled mine all apart and epoxied everything back together..looked good until my friend tried lifting himself out of my car with it, now it's shattered.

JY? PnP? I saw many center consoles this last weekend.

 

[Dan]

the plastic pull rod for the reverse lockout?

 

[hiperfauto]

I have a NOS pull rod if you need an example.

 

[Redwood Chair]

I would really really really like a mirror image of the left hand kick plate without the fuse box access panel. On my 242 there's a hole covered with a plate underneath the computer that leads to the outside world. Turns out the fresh air vent that I got off my parts car will bolt right in that hole, just need a kick plate with a slot for the lever and vent holes and voila fresh air vents on both sides like a 142.

Get one from a 140.

 

[VB242]

Get one from a 140.

Does it fit and look ok?

 

[Maximum Turtles]

the plastic pull rod for the reverse lockout?

This part looks really doable. I don't have one myself to measure, but, if someone got some measurements I think it would be very easy to design, and could be printed on just about any printer (size permitting).

 

[iHateVolvoPeople]

This part looks really doable. I don't have one myself to measure, but, if someone got some measurements I think it would be very easy to design, and could be printed on just about any printer (size permitting).

Make me a center console lol nah just kidding, I need to figure out a substitute for volvos center console.

 

[Redwood Chair]

Does it fit and look ok?

Yep but any color you want as long as it's black.

 

[theknave]

Saw this at the Depot the other day. Only 2.9 G

 

[Martin L.]

Delrin?

POM

 

[propav8r]

New addition (Cupholder 2.0)
http://www.thingiverse.com/thing:900952

 

[Redwood Chair]

I would really really really like a mirror image of the left hand kick plate without the fuse box access panel. On my 242 there's a hole covered with a plate underneath the computer that leads to the outside world. Turns out the fresh air vent that I got off my parts car will bolt right in that hole, just need a kick plate with a slot for the lever and vent holes and voila fresh air vents on both sides like a 142.

Get one from a 140.

Does it fit and look ok?

Yep as long as the ECU isn't there, and you like black.

 

[RDC]

New addition (Cupholder 2.0)
http://www.thingiverse.com/thing:900952

Oh hey I made that

The makerbot is trash.

I have a few parts I'll be putting in this thread in a week or so... I've been doing this separate from knowing about this thread