940 engine fit into 240

[mschultz373]

i ended up cutting the sheet metal flaps under the front cross member to fit the intercooler beneath it; i missplaced the longer brackets shown in your pic Anthony.




in my foolish disorganized, i have to ask two additional n00b questions:
which linkage should I use to connect the 240 gearbox to the aw71 trans? these are the two linkages I have:



AND - these are the two heater core lines; i assume the line with the valve connects from water pump hard line to lower fitting on firewall (inlet to heater core)?

 

[white855T]

Left is 240 linkage. You don't need that heater valve.

 

[mschultz373]

thank you for your help as always white855.