• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

B20 Specs/Measurements

hensh_ma

hensh_ma

New member
Joined
May 20, 2024
I have a B20B block at the machine shop and I want to be sure the crank, camshaft, rods, and bearing surfaces are all within spec. They said they can check, but I’d need to provide specs as they don’t have anything for this engine.

Does anyone have an idea of a truly reliable source to find these measurements? Or ran into this before with a machine shop?
 
hensh_ma said:
I have a B20B block at the machine shop and I want to be sure the crank, camshaft, rods, and bearing surfaces are all within spec. They said they can check, but I’d need to provide specs as they don’t have anything for this engine.

Does anyone have an idea of a truly reliable source to find these measurements? Or ran into this before with a machine shop?
Click to expand...
Is this what you need?


Especially:

 
You must log in or register to reply here.
Back
Top