Tfrasca
Active member
- Joined
- Apr 20, 2015
- Location
- Ben Lomond, CA
I don't have a frame of reference for this. The idle on my 142 seems rougher than it should be. IPD cam advanced 2 degrees with Dale's gear, 60 lb Dekas, 3" AMM, Mike's chips. It currently has stock (not diesel) motor mounts.
In the video, it doesn't look like much, but it shakes the car and I know other 240s are much smoother. Spark plugs are new and at .28, cap, rotor, and wires are less than 5,000 miles old. Fuel pressure is rock steady and 2.5 bar right now, and at 3.0 bar it was the same. Any thoughts?
<iframe width="560" height="315" src="https://www.youtube.com/embed/U6-XWp2mIgU" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
In the video, it doesn't look like much, but it shakes the car and I know other 240s are much smoother. Spark plugs are new and at .28, cap, rotor, and wires are less than 5,000 miles old. Fuel pressure is rock steady and 2.5 bar right now, and at 3.0 bar it was the same. Any thoughts?
<iframe width="560" height="315" src="https://www.youtube.com/embed/U6-XWp2mIgU" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>