GTA wheel center cap options?

[Sir Psycho]

Is everyone just running the ugly Trans Am center caps that stick out really far? They seem to cost $100/set. I was hoping there is another option that some of you are running.
Currently I am running no caps:

 

[2fast242gt]

You need some taller tires and or more low! I like, what's the wheel bores i.d? I'm sure you can find something or stay capless.

 

[alreadyupsidedown]

Maybe try some of these? Most likely not the exact same diameter as the GTA center bore, but I bet you could make them fit with a little ingenuity. The black style looks good on pretty much all Volvos from the 70s to 2000s.

 

[745 TurboGreasel]

Grand National caps will click right in there.

 

[amerbritcan]

Dat wheel gap doe.

Car looked better on pegs IMO. Only thing that might look better is polaris/eiker.

 

[Rogue Status]

Wheels look great, IMO. Maybe a taller tire would fill the arches, or just bring the car down more.

I had a few ideas when it came to center caps, really just need to measure the bore and go hunting at the junkyard for caps that will fit in the bore and won't fall out.

 

[240_tom]

That looks awsome fella, if it were my car id paint the center of the wheel gold and maybe get the car sitting a little lowwer.

 

[propav8r]

Dat wheel gap doe.

Car looked better on pegs IMO. Only thing that might look better is polaris/eiker.

He had some eikers on there for awhile.

 

[Turbosteen]

Can you still buy these GTA wheels new? And I mean with some quality to it, really like the look but over here those cars where rarely sold..

 

[AndrewNance]

You can buy reps for about $200/ea. There's two different styles but the differences are really subtle.

http://m.summitracing.com/parts/oer-10104411?seid=srese1&gclid=COK98KDY2sMCFajm7AodyEgAqw

 

[kampman]

He had some eikers on there for awhile.

Those are Mille Miglias, I think.

 

[Simi]

He had some eikers on there for awhile.

Uh those are Miglia M11s

Those are Mille Miglias, I think.

damn

 

[MikeJr.]

+1
It would be nice if we could get one of the CNC fab guys on the board to make a flush metal type. The stock one are awful, they stick out a mile. Flush ones with a volvo symbol would be nice, or even ones with bbs would be nice.