hardware/ threads faq

[nickm]

flex disk/guibo nut and bolts whats size are these?

 

[foggyjames]

Fairly big. M12 or M14. 19mm heads, IIRC.

cheers

James

 

[Texas240]

what size bolt head is the oil drain plug on oil pan?

 

[NotSoFresh]

this thread should be moderated to eliminate questions if they are already answered.

 

[v tech]

this helped me out gonna get some exhuast manifold bolts crossreffrenced thanks again

 

[foggyjames]

I believe the sump plug on a 2/7/900 with a B200/B230 has a 24mm head.
On a 360 with a B200 and the ally sump, you use a 3/8" drive rachet.

cheers

James

 

[Texas240]

I believe the sump plug on a 2/7/900 with a B200/B230 has a 24mm head.
On a 360 with a B200 and the ally sump, you use a 3/8" drive rachet.

cheers

James

that is one socket that i dont have in my tool box...TOOL SHOPPING TIME!!!!!

 

[NotSoFresh]

I believe the sump plug on a 2/7/900 with a B200/B230 has a 24mm head.
On a 360 with a B200 and the ally sump, you use a 3/8" drive rachet.

cheers

James

the strut nut is 24mm also.

 

[BDKR]

How about power stage info? Anyone care to add those part numbers?

 

[nitroboie]

I believe the sump plug on a 2/7/900 with a B200/B230 has a 24mm head.

Mine is actually 25mm or 1"

the strut nut is 24mm also.

Correct, or 15/16". Crank bolt is the same size. I wish the drain plug was 24mm, that way I'd have more than two uses for that socket, but I always buy whichever socket is cheaper

 

[foggyjames]

Actually, I think you're right - it is 1". I have a feeling a 24mm fits (I could be talking nonsense...!), but a 1" socket is the intended tool.

cheers

James

 

[Raz]

if it's 1" it's 25.4mm, no a 24mm shouldn't work, 1.4mm variance, that's some loose sockets

 

[foggyjames]

Probably nonsense on my part, then

cheers

James

 

[Raz]

it's all good

 

[blarf]

Oil filter adapter uses a 32mm head where it bolts into the block.

 

[Ursan]

Anyone know offhand the size of the bolts to mount the CBV to the head & those that attach the lower turbo (90+) manifold support the the block?

 

[greymatter]

Oil filter adapter uses a 32mm head where it bolts into the block.

Thats the funniest image i've seen all week.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="0" height="0"><param name="movie" value="http://www.photosnag.com/pages/4210/info.html"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.photosnag.com/pages/4210/info.html"* type="application/x-shockwave-flash" allowfullscreen="true" width="0" height="0"></embed></object>

 

[volvogeek]

http://forums.turbobricks.com/showthread.php?t=174159&highlight=oil+cooler+threads

Thread mentions they're BSP (British Standard Pipe), measured the fittings on an oil cooler I have... Cooler itself looks to be 3/4 BSP, soft lines are 5/8 BSP. See http://www.pegasusautoracing.com/threaded-fitting-guide.asp for infoes... Pegasus also has BSP to NPT or AN adapters, so no need to hack and weld your oil cooler fittings.

 

[smokeyfan1000]

What sisze is OEM WT senderfor the IC "no numbers" WT gauge?? 3/8-18?? or metric?

 

[Cameron]

Courtesy of mr. volvo --

240 fuel filter = 14mm x 1.5 inlet & 12mm x 1.5 outlet