• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

No Power to Interior Light

staceyz

New member
Joined
Sep 29, 2012
I have a 1990 240 wagon, and I'm going through everything, so everything works. The one thing that stumps me is that I have no power in the 2 wires for the interior light. I have power in the rear interior light. Fuse is fine, is there any place I can check or common places for the wire to break? Maybe you can shed some light on the sitution :oogle: Thanks, Stacey
 

cleanflametrap

Active member
Joined
Sep 3, 2009
Location
near baltimore
I have a 1990 240 wagon, and I'm going through everything, so everything works. The one thing that stumps me is that I have no power in the 2 wires for the interior light. I have power in the rear interior light. Fuse is fine, is there any place I can check or common places for the wire to break? Maybe you can shed some light on the sitution :oogle: Thanks, Stacey

:) Could be a green wire came off of fuse 8 if you don't have battery voltage up there at the light socket. Here are some links to the diagrams. The green wire is wired the same whether you have the (at some point optional) delay feature or don't:

http://cleanflametrap.com/92wdm52.jpg

http://cleanflametrap.com/92wdm53.jpg
 
Top