• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

rear cam plug 1993 240 wagon

Gently pry it out. Dry the surface. Put a VERY SMALL film of RTV on the seal. Push in new seal.
Get a seal retainer so it won't pop out.
 
Pull valve cover, pull rear cam cap, I like to coat the new cap plug in black rtv. Make sure the plug is placed flush with the head and not pushed in. If it is, you will still get a leak.
 
You must log in or register to reply here.
Back
Top