I need a new fuel sender for my 1990 Regina Volvo 745 GL. Does anyone know if this aftermarket sender by Delphi listed on CarID.com works? It is for Volvo 740 Regina variants (1988 to 1992). I am wary of buying something that looks so different from the original. From the photos, I’m not even sure if this one has a hole for the filler tube. I badly need a new unit and they are not available used. If anyone has any experience with these please let me know!
-
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software hereThank you for being a part of our community!
Should I buy? Aftermarket Fuel Sender Assembly for 1988-1992 Volvo 740 with Regina.
- Thread starter agentj
- Start date
dl242gt
The world of the smiling Dogo
- Joined
- Jun 21, 2002
- Location
- S NJ, a suburb of Phila.
I can only reference my own experience with aftermarket fuel senders which is good. Delphi is just reboxing someone else's product. I would give it a try. If a Volvo unit is available it's going to be three for four times the price.
2manyturbos
Moderator
- Joined
- Mar 8, 2003
- Location
- Monroe, OR USA
That picture might just be a generic sending unit picture. If that is a pic of the actual sending unit, it will not work. As you said, it doesn't have the fill tube feature.
MasterBlaster
Well-known member
- Joined
- Feb 16, 2009
- Location
- Port Coquitlam
Also fits Ford E-series? ONLY fits Ford E-series.
Here's what the Delphi site itself shows for a 90 E-250
Not even close to a Volvo part.
CarID is stoned on something.
Here's what the Delphi site itself shows for a 90 E-250
Not even close to a Volvo part.
CarID is stoned on something.
Thanks for letting me know. You know where I might be able to find a used one?
MasterBlaster
Well-known member
- Joined
- Feb 16, 2009
- Location
- Port Coquitlam
Only the one in my car, and I'm kinda still using it.
