roflcopter
New member
- Joined
- Sep 30, 2013
- Location
- Lower Alabama
Awesome! I won't have the engine out/apart/cleaned for another few weeks anyways. Anyone have a link to some more info on which squirters work well and all?
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Awesome! I won't have the engine out/apart/cleaned for another few weeks anyways. Anyone have a link to some more info on which squirters work well and all?
I will get in line for this thing. Block is ready. I'll hold off on the machine shop for now.
Thumb back a couple pages, the boys linked to where to get them or call John V.
Kit's back in Cali, you have PM regarding the deposit.
On it's way, priority flat rate padded envelope, expected delivery 4 / 14 / 2014.
And me, I think. I'll be quick though, I already have my block torn down.
Got it and done! On the way back to you Ken!
PP sent and I'll start charging my drill.
Refund incoming, thanks for the quick turn around aendrony.
Its here and I'm about to use it.
Edit: my b23 is a squirter. I'll send the kit back tomorrow.
My next challenge is adding an oil return to a B23 block. There's not a pad to drill out like on the B230s.
I'm seriously interested in doing this to my block since the bottom end has to come apart anyways.
What's the protocol for getting in line? What does a set of squirters typically run from a good source(which would be)? Sorry if it's been answered before, I read the first few pages and figured they'd be in the stickied OP but couldn't find them!
Hello, I would like to get on the list. Block is bare and ready. Where do I send the 100 deposit plus 6.oo mail?