Volvo 16v wasted spark build questions

[Sven's245]

Hello all. Im currently gathering the last few parts of my 16v head swap onto my LH 2.4 b230ft.

So ill be using the Buchka wasted spark set up and I wondering if it will be okay if I use the the stock LH 2.4 ECU instead of the micro squirt? will the engine run okay? Im trying to understand everything before I start tearing into things.

From what I understand when using micro squirt is I would be able to tune the engine for optimal performance?

Ive heard of people using the LH 2.4 with a 16v head and having success with the proper air fuels ratios and performance?

Any Suggestions?

thanks in advanced!

 

[Arewethereyet]

My 16v/ HX52 uses ( temporarily for running in/ proving engine ) the LH2.4 and 8v distributor I used on my 8v set up as it was with ecu & ezk chips for the vxr injectors with stock AMM and 6800 limit. Starts and runs fine so far. It’s a good starting point.