AndrewNance
Amateur hour!
- Joined
- Oct 24, 2011
- Location
- Winston-Salem, NC
Back on the grind today. Finally got that TB-esque rake I wanted:
Just kidding.
WHOMP.
It rides okay. I still have to cut the bump stops down because it rests on them.The rear needs the limiting straps to be shortened so the springs can't fall out at max extension. All that stuff happens tomorrow as well as the wheels finally going on the car. Possibly a half-ass alignment job too since the local shop won't mess with lowered vehicles.
Then I came home and found my Schneider 274 cam on the doorstep which means I can finally start building the B20 back! Then refresh the M41, rebuild my driveshaft, get my header ceramic coated along with an exhaust made. The list never gets any shorter.
Just kidding.
WHOMP.
It rides okay. I still have to cut the bump stops down because it rests on them.The rear needs the limiting straps to be shortened so the springs can't fall out at max extension. All that stuff happens tomorrow as well as the wheels finally going on the car. Possibly a half-ass alignment job too since the local shop won't mess with lowered vehicles.
Then I came home and found my Schneider 274 cam on the doorstep which means I can finally start building the B20 back! Then refresh the M41, rebuild my driveshaft, get my header ceramic coated along with an exhaust made. The list never gets any shorter.